| |
 |
The sauna essentially consists of 3 basic elements:
- the heat and function control system
- the structure (booth)
- the heating element (stove)
SAUNA ITALIA differs in terms of all these elements.
|
|
| |
|
THE ELECTRONIC CONTROL PANEL
controlled by microprocessor |
|
| |
|
With temperature control, ON/OFF time programming, remote-call
indicator, system
on max safety temperature
125° C, internal temperature display. |

|
|
|
| |
|
THE BOOTH |
|
| |
|
 |
This has a special structure. The frames of
each wall are made of wood laminate connected together by dovetail
joints to prevent deformation due to inside/outside temperature
difference. The inside of the walls, glued and hot pressed,
is made of natural Hemlock; the outside, glued and hot pressed,
is made of laminated beechwood, suitably treated and washable,
with matt finish. The walls thus become a sturdy element that
does not deform over the years. |
|
|
| |
|
THE HEATER |
|
| |
|
| Developed on the basis of a long
production experience, the SINTESI heaters have been designed
and built with original and specific features. The three chambers
making up the SINTESI heaters enable them to work by convection
only, which makes it possible to heat up in a very short time
with very low consumption while keeping the back wall and the
outer bulkhead at ambient temperature. |
 |
|
|
| |
|
THE DOOR |
|
| |
|
This is made of extra-thick tempered
glass.
|
|
| |
|
THE INTERNAL FITTINGS |
|
| |
|
The internal fittings are made of laminated
Okoum wood treated with non-toxic varnishes, which can be easily removed
for cleaning and washing. Also features an internal lighting system
with lights that vary in colour and intensity-red, yellow, green,
blue... controlled by a special microprocessor-controlled electronic
circuit. |
|